Installation de git “sudo: apt-get: command not found”

J'essaye d'installer git. Je lance la commande suivante:

sudo apt-get install git-core git-gui git-doc

Mais recevez l'erreur suivante: sudo: apt-get: command not found

Que devrais-je faire?

Puisque vous utilisez CentOS 5, le gestionnaire de paquets par défaut est yumnon apt-get. Pour installer un programme l’utilisant, vous utiliserez normalement la commande suivante:

$ sudo yum install <packagename>

Cependant, lorsque vous essayez d'installer git de cette manière, vous rencontrerez l'erreur suivante sur CentOS 5:

$ sudo yum install git
Setting up Install Process
Parsing package install arguments
No package git available.
Nothing to do

Cela vous indique que les référentiels de packages yumconnus ne contiennent pas les fichiers rpms (fichiers du gestionnaire de packages RPM) requis à installer git. Ceci est probablement dû au fait que CentOS 5 est basé sur RHEL 5, publié en 2007, qui gitétait auparavant considéré comme un système de contrôle de version mature. Pour résoudre ce problème, nous devons ajouter des référentiels supplémentaires à la liste yumutilisée (nous allons ajouter le référentiel RPMforge, conformément à ces instructions ).

Cela suppose que vous souhaitiez les packages i386. Testez en exécutant uname -i. Si vous souhaitez les packages x86_64, remplacez toutes les occurrences de i386 par x86_64 dans les commandes suivantes.

Tout d'abord, téléchargez le rpmforge-releasepackage:

$ wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.3-1.el5.rf.i386.rpm

Ensuite, vérifiez et installez le paquet:

$ sudo rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
$ rpm -K rpmforge-release-0.5.3-1.el5.rf.i386.rpm
$ sudo rpm -i rpmforge-release-0.5.3-1.el5.rf.i386.rpm

Et maintenant, nous devrions pouvoir installer git:

$ sudo yum install git-gui

yumtravaillera sur les dépendances et vous demandera aux endroits appropriés si vous voulez continuer. Appuyez sur ypour Oui et nou returnpour Non.

Utilisez-vous une distribution liée à Debian? Sinon, vous devrez peut-être utiliser un autre gestionnaire de paquets, tel que YUM (de nos jours Red Hat, CentOS, etc.), Portage, Entropy, RPM, etc.

Si vous utilisez une distribution liée à Debian:

Qu'est-ce que ça vous donne?

$ command -V apt-get
apt-get is /usr/bin/apt-get

Le binaire est-il vraiment là?

$ file /usr/bin/apt-get
/usr/bin/apt-get: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped

Si vous voulez construire Git à partir de sources, voici ce qui peut vous aider. Ce sont des scripts de construction de Noloader Github | Scripts de construction . Je les utilise pour les anciens systèmes d’exploitation, comme CentOS 5 et une carte de développement MIPS ci20. Les distributions ne gèrent plus le dépôt, c’est donc le seul moyen fiable de mettre à jour le logiciel. Les scripts sont également utiles pour les systèmes d’exploitation plus récents, tels que Solaris, car Oracle souhaite que vous achetiez un contrat de service pour obtenir les mises à jour.

Voici le script Git. C'est ajouté ici pour s'assurer que la réponse a de la substance. Mais vous devriez revenir au GitHub car je les modifie parfois pour obtenir la dernière version de certains paquets.

#!/usr/bin/env bash

# See fixup for INSTALL_LIBDIR below
INSTALL_PREFIX=/usr/local
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"

# OpenSSH can only use OpenSSL 1.0.2 at the moment
OPENSSL_TAR=openssl-1.0.2l.tar.gz
OPENSSL_DIR=openssl-1.0.2l
#OPENSSL_TAR=openssl-1.1.0e.tar.gz
#OPENSSL_DIR=openssl-1.1.0e

ZLIB_TAR=zlib-1.2.11.tar.gz
ZLIB_DIR=zlib-1.2.11

BZ2_TAR=bzip2-1.0.6.tar.gz
BZ2_DIR=bzip2-1.0.6

READLN_TAR=readline-7.0.tar.gz
READLN_DIR=readline-7.0

UNISTR_TAR=libunistring-0.9.7.tar.gz
UNISTR_DIR=libunistring-0.9.7

ICONV_TAR=libiconv-1.15.tar.gz
ICONV_DIR=libiconv-1.15

IDN2_TAR=libidn2-0.16.tar.gz
IDN2_DIR=libidn2-0.16

PCRE_TAR=pcre-8.40.tar.gz
PCRE_DIR=pcre-8.40

PCRE2_TAR=pcre2-10.23.tar.gz
PCRE2_DIR=pcre2-10.23

CURL_TAR=curl-7.54.0.tar.gz
CURL_DIR=curl-7.54.0

GIT_TAR=v2.13.0.tar.gz
GIT_DIR=git-2.13.0

# Unset to avoid using an existing trust store when configuring cURL.
# No trust store will be supplied for some OSes, like Solaris.
# Also see '/usr/bin/curl-config --ca' and '/usr/bin/curl-config --configure'
USE_TRUST_STORE=1

###############################################################################

# Autotools on Solaris has an implied requirement for GNU gear. Things fall apart without it.
# Also see https://blogs.oracle.com/partnertech/entry/preparing_for_the_upcoming_removal.
if [[ -d "/usr/gnu/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/gnu/bin"*) ]]; then
        echo
        echo "Adding /usr/gnu/bin to PATH for Solaris"
        PATH="/usr/gnu/bin:$PATH"
    fi
elif [[ -d "/usr/swf/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/sfw/bin"*) ]]; then
        echo
        echo "Adding /usr/sfw/bin to PATH for Solaris"
        PATH="/usr/sfw/bin:$PATH"
    fi
elif [[ -d "/usr/ucb/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/ucb/bin"*) ]]; then
        echo
        echo "Adding /usr/ucb/bin to PATH for Solaris"
        PATH="/usr/ucb/bin:$PATH"
    fi
fi

###############################################################################

if [[ -z `which autoreconf` ]]; then
    echo "Some packages require autoreconf. Please install autoconf or automake."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

if [[ -z `which msgfmt` ]]; then
    echo "Git requires msgfmt. Please install gettext."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

###############################################################################

echo
echo "If you enter a sudo password, then it will be used for installation."
echo "If you don't enter a password, then ensure INSTALL_PREFIX is writable."
echo "To avoid sudo and the password, just press ENTER and they won't be used."
read -s -p "Please enter password for sudo: " SUDO_PASSWWORD
echo

###############################################################################

THIS_SYSTEM=$(uname -s 2>&1)
IS_DARWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c darwin)
IS_LINUX=$(echo -n "$THIS_SYSTEM" | grep -i -c linux)
IS_CYGWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c cygwin)
IS_MINGW=$(echo -n "$THIS_SYSTEM" | grep -i -c mingw)
IS_OPENBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c openbsd)
IS_DRAGONFLY=$(echo -n "$THIS_SYSTEM" | grep -i -c dragonfly)
IS_FREEBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c freebsd)
IS_NETBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c netbsd)
IS_SOLARIS=$(echo -n "$THIS_SYSTEM" | grep -i -c sunos)

if [[ ("$IS_FREEBSD" -eq "1" || "$IS_OPENBSD" -eq "1" || "$IS_NETBSD" -eq "1" || "$IS_DRAGONFLY" -eq "1" || "$IS_SOLARIS" -eq "1") ]]; then
    if [[ !(-z `which gmake 2>/dev/null | grep -v 'no gmake'`) ]]; then
        MAKE=gmake
    else
        MAKE=make
    fi
else
    MAKE=make
fi

# Try to determine 32 vs 64-bit, /usr/local/lib, /usr/local/lib32 and /usr/local/lib64
# The Autoconf programs misdetect Solaris as x86 even though its x64. OpenBSD has
# getconf, but it does not have LONG_BIT.
IS_64BIT=$(getconf LONG_BIT 2>&1 | grep -i -c 64)
if [[ "$IS_64BIT" -eq "0" ]]; then
    IS_64BIT=$(file /bin/ls 2>&1 | grep -i -c '64-bit')
fi

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    SH_KBITS=64
    SH_MARCH=-m64
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
    INSTALL_LIBDIR_DIR="lib64"
elif [[ "$IS_64BIT" -eq "1" ]]; then
    if [[ (-d /usr/lib) && (-d /usr/lib32) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    elif [[ (-d /usr/lib) && (-d /usr/lib64) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
        INSTALL_LIBDIR_DIR="lib64"
    else
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    fi
else
    SH_KBITS=32
    SH_MARCH=-m32
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
    INSTALL_LIBDIR_DIR="lib"
fi

if [[ -z "$CC" ]]; then CC=`which cc`; fi

MARCH_ERROR=`$CC $SH_MARCH -x c -c -o /dev/null - </dev/null 2>&1 | grep -i -c error`
if [[ "$MARCH_ERROR" -ne "0" ]]; then
    SH_MARCH=
fi

echo
echo "********** libdir **********"
echo
echo "Using libdir $INSTALL_LIBDIR"

###############################################################################

echo
echo "********** zLib **********"
echo

wget "http://www.zlib.net/$ZLIB_TAR" -O "$ZLIB_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ZLIB_DIR" &>/dev/null
tar -xzf "$ZLIB_TAR"
cd "$ZLIB_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Bzip **********"
echo

wget "http://www.bzip.org/1.0.6/$BZ2_TAR" -O "$BZ2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$BZ2_DIR" &>/dev/null
tar -xzf "$BZ2_TAR"
cd "$BZ2_DIR"

# Fix Bzip install paths
cp Makefile Makefile.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Fix Bzip cpu architecture
cp Makefile Makefile.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
cp Makefile Makefile.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Add RPATH
cp Makefile Makefile.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install PREFIX="$INSTALL_PREFIX" LIBDIR="$INSTALL_LIBDIR")
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Unistring **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/libunistring/$UNISTR_TAR" --no-check-certificate -O "$UNISTR_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$UNISTR_DIR" &>/dev/null
tar -xzf "$UNISTR_TAR"
cd "$UNISTR_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Readline **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/readline/$READLN_TAR" --no-check-certificate -O "$READLN_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$READLN_DIR" &>/dev/null
tar -xzf "$READLN_TAR"
cd "$READLN_DIR"

SH_LDLIBS=("-ldl" "-lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** iConvert **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/pub/gnu/libiconv/$ICONV_TAR" --no-check-certificate -O "$ICONV_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ICONV_DIR" &>/dev/null
tar -xzf "$ICONV_TAR"
cd "$ICONV_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** IDN2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://alpha.gnu.org/gnu/libidn/$IDN2_TAR" --no-check-certificate -O "$IDN2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$IDN2_DIR" &>/dev/null
tar -xzf "$IDN2_TAR"
cd "$IDN2_DIR"

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    cp src/idn2.c src/idn2.c.orig
    sed '/^#include "error.h"/d' src/idn2.c.orig > src/idn2.c
    cp src/idn2.c src/idn2.c.orig
    sed '43istatic void error (int status, int errnum, const char *format, ...);' src/idn2.c.orig > src/idn2.c
    rm src/idn2.c.orig

    echo "" >> src/idn2.c
    echo "static void" >> src/idn2.c
    echo "error (int status, int errnum, const char *format, ...)" >> src/idn2.c
    echo "{" >> src/idn2.c
    echo "  va_list args;" >> src/idn2.c
    echo "  va_start(args, format);" >> src/idn2.c
    echo "  vfprintf(stderr, format, args);" >> src/idn2.c
    echo "  va_end(args);" >> src/idn2.c
    echo "  exit(status);" >> src/idn2.c
    echo "}" >> src/idn2.c
    echo "" >> src/idn2.c
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** OpenSSL **********"
echo

# wget on Ubuntu 16 cannot validate against Let's Encrypt certificate
wget "https://www.openssl.org/source/$OPENSSL_TAR" --no-check-certificate -O "$OPENSSL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$OPENSSL_DIR" &>/dev/null
tar -xzf "$OPENSSL_TAR"
cd "$OPENSSL_DIR"

# OpenSSL and enable-ec_nistp_64_gcc_128 option
IS_X86_64=$(uname -m 2>&1 | egrep -i -c "(amd64|x86_64)")
if [[ "$SH_KBITS" -eq "32" ]]; then IS_X86_64=0; fi

CONFIG=./config
CONFIG_FLAGS=("no-ssl2" "no-ssl3" "no-comp" "shared" "-DNDEBUG" "-Wl,-rpath,$INSTALL_LIBDIR"
        "--prefix=$INSTALL_PREFIX" "--openssldir=$INSTALL_PREFIX" "--libdir=$INSTALL_LIBDIR_DIR")
if [[ "$IS_X86_64" -eq "1" ]]; then
    CONFIG_FLAGS+=("enable-ec_nistp_64_gcc_128")
fi

KERNEL_BITS="$SH_KBITS" "$CONFIG" "${CONFIG_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 depend)
"$MAKE" "${MAKE_FLAGS[@]}"

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install_sw)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE_TAR" --no-check-certificate -O "$PCRE_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE_DIR" &>/dev/null
tar -xzf "$PCRE_TAR"
cd "$PCRE_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcregrep-libz --enable-pcregrep-libbz2 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE2_TAR" --no-check-certificate -O "$PCRE2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE2_DIR" &>/dev/null
tar -xzf "$PCRE2_TAR"
cd "$PCRE2_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcre2-8 --enable-pcre2-16 --enable-pcre2-32 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** cURL **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://curl.haxx.se/download/$CURL_TAR" --no-check-certificate -O "$CURL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$CURL_DIR" &>/dev/null
tar -xzf "$CURL_TAR"
cd "$CURL_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lidn2" "-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

if [[ ("$IS_SOLARIS" -ne ")" && "$USE_TRUST_STORE" -ne "0") ]]; then
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --without-ca-bundle --with-ca-path=/etc/openssl/certs --enable-ipv6 \
    --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
else
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-ipv6 --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
fi

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Git **********"
echo

# wget on Ubuntu 16 cannot validate against DigiCert certificate
wget "https://github.com/git/git/archive/$GIT_TAR" --no-check-certificate -O "$GIT_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$GIT_DIR" &>/dev/null
tar -xzf "$GIT_TAR"
cd "$GIT_DIR"

"$MAKE" configure

if [[ "$?" -ne "0" ]]; then
    echo "Failed to make configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# "Instruct Git to use pthread library?", http://stackoverflow.com/q/43080417/
for file in $(find `pwd` -iname 'Makefile*')
do 
    cp "$file" "$file.orig"
    sed 's|-lrt|-lrt -lpthread|g' "$file.orig" > "$file"
    rm "$file.orig"
done

# Various Solaris 11 workarounds
if [[ "$IS_SOLARIS" -eq "1" ]]; then
    for file in $(find `pwd` -iname 'Makefile*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
    for file in $(find `pwd` -iname 'config*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
fi

if [[ -e /usr/local/bin/perl ]]; then
    SH_PERL=/usr/local/bin/perl
elif [[ -e /usr/bin/perl ]]; then
    SH_PERL=/usr/bin/perl
else
    SH_PERL=perl
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-pthreads --with-lib="$INSTALL_LIBDIR" --with-openssl="$INSTALL_PREFIX" \
    --with-curl="$INSTALL_PREFIX" --with-libpcre="$INSTALL_PREFIX" --with-zlib="$INSTALL_PREFIX" \
    --with-iconv="$INSTALL_PREFIX" --with-perl="$SH_PERL" --prefix="$INSTALL_PREFIX"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(-j 4 all)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("info" "html")
    fi
fi

"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -eq "1" ]]; then
    echo "Failed to build Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(install)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("install-man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("install-info" "install-html")
    fi
fi

if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Cleanup **********"
echo

# Set to false to retain artifacts
if true; then

    ARTIFACTS=("$OPENSSL_TAR" "$OPENSSL_DIR" "$UNISTR_TAR" "$UNISTR_DIR" "$READLN_TAR" "$READLN_DIR"
            "$PCRE_TAR" "$PCRE_DIR" "$PCRE2_TAR" "$PCRE2_DIR" "$ZLIB_TAR" "$ZLIB_DIR"  "$BZ2_TAR" "$BZ2_DIR"
            "$IDN2_TAR" "$IDN2_DIR" "$ICONV_TAR" "$ICONV_DIR" "$CURL_TAR" "$CURL_DIR" "$GIT_TAR" "$GIT_DIR")

    for artifact in "${ARTIFACTS[@]}"; do
        rm -rf "$artifact"
    done

    # ./build-git.sh 2>&1 | tee build-git.log
    if [[ -e build-git.log ]]; then
        rm build-git.log
    fi
fi

[[ "$0" = "$BASH_SOURCE" ]] && exit 0 || return 0

SI vous décidez d'utiliser lesudomot de passe, envisagez de désactiver temporairement l'historique Bash afin que le mot de passe ne soit pas enregistré. Je désactive les historiques pour ne pas enregistrer accidentellement des informations sensibles. Ce n'est donc pas un problème pour moi.